AF2000 Electromagnetic Flowmeter
Product Description
The electromagnetic flowmeter (EMF) can be used to accurately measure the flow of liquid, pulp, slurry and ore pulp with conductivity greater than 5 μS/cm. The AF2000 integrated EMF is a flow measurement system in which the sensor and transducer are designed into one, while the AF2000 Seperated EMF is the sensor and transducer installed separately.
Features
-
High accuracy0.5% reading
-
Diverse communication modes4-20mA+HART+Modbus+Contact switch (both active and passive outputs can be selected)
-
Various process connectionsFlanges conforms to GB+ASME/ANSI+GOST+JIS+EN
-
Wide range of electrodes316L, HC, Platinum-iridium alloy, Tantalum, Titanium, etc
-
Multiple lining optionsPTFE, PFA, F46, Chloroprene rubber, etc.
-
IP ratingIP67 + IP68 Submersible split-type (Sensor end)
-
Bidirectional measurement capability
-
Self-diagnostic function
-
Self-diagnostic functionWide voltage range 85-253V AC/16.8-26.4V AC/16.8-31.2V DC
Technical Data
-
Sensor
-
Type
Flange type & Clamp type
-
Accuracy
0.5% indication
-
Diameter (mm)
DN10-DN1000 (Clamp type DN10-DN100)
-
Pressure Rating (MPa)
1.0-4.0 (by diameter)
-
Lining Material
Rubber, PTFE, PFA, F46, Others according to the order requirements
-
Conductivity
>5μS/cm
-
Electrode
Stainless steel 0Cr18Ni12Mo2Ti, Hastelloy B2/C4, platinum-iridium, tantalum, titanium
-
IP Grade
IP67
-
Fluid Temperature
-25~+130° C (rubber lining ≤ 65° C)
-
Transducer
-
Power Supply
85-253V AC/16.8-26.4V AC/16.8-31.2V DC
-
Current Output
0/2-10mA, 0-5mA, 0/4-20mA, 0/4-10/12-20mA
-
Pulse Output
Active 24 V DC pulse or passive optocoupler
-
Data Transmission
RS485 (optional), HART protocol
-
Forward/Reverse Flow
Positive signal optocoupler output
-
Self-test
Available
-
Field Indication/Accumulation
Available
-
Housing Material
Cast aluminum and carbon steel housing(DE43F/DE43W Cast aluminum (standard))
Services & Support
The Latest
